Re: SEQ Trail thread

[WIDELOAD]

Mog is all fixed...the wire snapped halfway down, soldered back together and booyah...it workies!
I now have heat shrink around all the wires to give it a bit of protection.

So the Mog is ready to rock all over again!

[WIDELOAD]

Okay guys, my turn for a social run.
It will be at the old quarry near my place (check the new hot spots thread for details)
I'm easy for either the 13th (sat) or the 14th (sun)
Either day suits me, so majority rule. Would prefer a arvo run as the sun wont be as bad (not much shade, so bring a hat). But again whatever suits the majority.

Let me know what day would be best and what time?

Cheers, Troy.

[Aperture]

Hi Guys

Just wanted to say thanks heaps for the turn out and the support. I had to strip the truck back and repair a few things as well. Also had to lift a few panels here and there for more clearance from those rocks.

The new paint job is on in earnest now.

Again cheers for the turnout and look forward to catching up with everyone again on the next trail.

[Rustykaos]

Well I am out if it is on the 14th but very keen for the 13th after 12pm maybe.

Cheers Jarrod

[scottb]

I don't mind either day suits me,arvo sounds good to as it looks alot like the terain at our local quary and its fricken hot at the top of the day.
.
.

[scottb]

Hi all....No one has replied to what day to go to the quary..........Is it going ahead or not?







Scott

[Ads]

hey scott, the dates mentioned up a bit work out to next weekend. so im not sure what people are upto this weekend. there were a few ppl maybe going to Broadwater Park, Mansfield? but i dont really no.

cheers ads

[Rustykaos]

If you want a catch up tomorrow I will be free scott. Just say where you want to go.

[RiZZa]

I'm in the scale garage til qrock.

[Ads]

i wont have the honcho by tomoro but i might be able to get the losi driveable, at least come for a play for a bit, practice with the new rear steer set up. let us no whats doing?

cheers ads

[Ads]

got the losi(night crawler) up and running, not my final or ideal set up currently but it will work good enough to get me by for a run. so where are people keen to go and when, i am pretty easy.

cheers ads

[scottb]

Well....are you keen for whites hill,that way its sorta in the middle for you guys living on the nth side.
I was thinking 12 onwards,got something to do in the morn.What do you guys recon?
Rizza...what your out till the comp,is your truck in pieces mate?



Scott

[Ads]

yea whites hill sounds good to me scott, i didnt have a truck to run last time and u didnt get to run out there either. there is plenty there for both scale and the 2.2. yea mate 12 is cool with me. will shoot you a pm.

cheers ads

[scottb]

Ok Ads............see you there around 12....onwards

[Aperture]

Hey boys

i may be there as well. i am in the process of painting bodies. plus there are some great creek runs you did not get to see last time ads.

just remember....no thongs.

[Ads]

haha yea sweet mate, should be good, yea poor old simo hahah, im normally sweet with pluggers but shoes might be the go haha. will be out at 12ish, u have my mobile n so does scottb if u need to get hold of me.

cheers ads

[gravedigger]

I'll try to be there , same spot as last time ?

[Rustykaos]

Cool. See you at Whites Hill by 12pm.

[scottb]

Hey Chuck, i'm just going to the end of the road where the boulders are across the road. I assume thats the place.

[Rustykaos]

Leaving now. See you there around 12. BTW the CC01 isn't waterproof at the moment so no submerging today.

[Ads]

was a good little run today, i had a heap of fun. only a few people but we did a bit of exploring which was cool. nice little creek made for winch ss's haha. just good to get out and drive the losi again and cant wait to get this bloody honcho built. will be cool to see the little videos if they show up grave digger

cheers ads

[Rustykaos]

Had fun today even tho the CC01's servo played up. Pulled it apart and a wire had come off. Replaced the servo with a Traxxas waterproof job so will be much better and turning the old servo into a winch. Can't wait to see the videos Gravedigger.

Cheers Jarrod

[Ads]

yea that was a bit of a $#itta, will be cool to see the mid mount servo winch on the cc01. Maybe a new front bar for the winch??

cheers ads

[Rustykaos]

Yeah thats the next step after I figure out a way to attach a reel to the servo. I will look into ways of attaching a fairlead into the front bumper somehow.

[scottb]

Yeh it was a good arvo...in the mudy swamp land,the area was different,not to much bush trail to get into but we had fun.







Scott

[RiZZa]

Well....are you keen for whites hill,that way its sorta in the middle for you guys living on the nth side.
I was thinking 12 onwards,got something to do in the morn.What do you guys recon?
Rizza...what your out till the comp,is your truck in pieces mate?



Scott

At the moment its a roller lol. I have a small weekly budget that I 'stick' to thereabouts. Next week I have front cvds and and a new diff for the front. The next order will be servo mount/4 link plates from RC Bros but I'll sort the 4 link out after QRock. The following order will be the BL setup just in time for the comp I think. The zuk may have to wait as well.

[gravedigger]

vids are up

[WIDELOAD]

You guys still in for a run down my way this weekend?

Went up to the quarry earlier this week, and put 5hours worth of run time on the Mog (didnt even get into the main part)
Forgot how massive this place is and there is some awesome terrain from massive washouts to big hill climbs plus little bit of mud (no water though, unless you count the dam) for those who want to play in that
I'm looking forward to showing you all in person..

I'm thinking Sunday arvo about 2ish...hows that sound to everybody?

[Ads]

I got a big parcel today, so if I pull my finger out I might have my new honcho In a drivable state, clear shell and standard plastic barwork, but not making any promises lol.

But the time and day sounds good, gives me the most chance to get it ready.

Cheers ads

[WIDELOAD]

I got a big parcel today, so if I pull my finger out I might have my new honcho In a drivable state, clear shell and standard plastic barwork, but not making any promises lol.
But the time and day sounds good, gives me the most chance to get it ready.
Cheers ads

Do it ads, bust arse and git-'er-done!

[scottb]

Yeh Troy, Owen and i will be there around 2pm. I bought the Marion Mog of Rizza this week,so i've started to think of idears to mount on the Losi.
I need a stainless small hinge or piano hinge for the cab.It will be hinged on the front bull bar mount,with the cab going forward to get at the existing batteries.

Scott

[WIDELOAD]

Yeh Troy, Owen and i will be there around 2pm. I bought the Marion Mog of Rizza this week,so i've started to think of idears to mount on the Losi.
I need a stainless small hinge or piano hinge for the cab.It will be hinged on the front bull bar mount,with the cab going forward to get at the existing batteries.
Scott

I might be able to help you with the hinge, what size does it need to be man?

[scottb]

Well.....80mm long x approx 10mm wide,it can be up to 20mm wide max. Why what have you got mate?




Scott

[WIDELOAD]

Well.....80mm long x approx 10mm wide,it can be up to 20mm wide max. Why what have you got mate?
Scott

Check your PM's scotty.

[Sponsored content]