Axial: Broken Lower Link Mount Fix
4 posters
Page 1 of 1
Axial: Broken Lower Link Mount Fix
OK so I was going through my stuff and starting another build, only to find broken lower link mounts.
Being a tigharse I though how hard could it be to make something that wont break again, and here is the results.
This is how it started out:
Cost $1 from Bunnings.
With a few cuts with the 4" and a tack with the mig this is the finished product:
So you can braise this if you like, I just used the mig 'cause I cant find my braising gear after the move.
Here are a couple with them mounted, testing to follow.
Being a tigharse I though how hard could it be to make something that wont break again, and here is the results.
This is how it started out:
Cost $1 from Bunnings.
With a few cuts with the 4" and a tack with the mig this is the finished product:
So you can braise this if you like, I just used the mig 'cause I cant find my braising gear after the move.
Here are a couple with them mounted, testing to follow.
cliff- Posts : 62
Legend Status : 3
Join date : 2010-10-28
Age : 51
Location : Caboolture
Re: Axial: Broken Lower Link Mount Fix
nice , simple & effective , top stuff rich.
cheers azwa.
cheers azwa.
azwa- Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 49
Location : earth
Re: Axial: Broken Lower Link Mount Fix
Being a tigharse helps!!
Fitted them up and no issues with placement, or clearance. I will be heading out soon to test them out!
Fitted them up and no issues with placement, or clearance. I will be heading out soon to test them out!
cliff- Posts : 62
Legend Status : 3
Join date : 2010-10-28
Age : 51
Location : Caboolture
Re: Axial: Broken Lower Link Mount Fix
Thats pretty awesome Rich...Will on in handy thats for sure.
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: Axial: Broken Lower Link Mount Fix
Great job man
scottb- Posts : 537
Legend Status : 18
Join date : 2010-10-26
Age : 59
Location : Waterford
Re: Axial: Broken Lower Link Mount Fix
now I need the output shafts for the tranny, or a new tranny! Stupid grab screws and alloy output shafts didn't mix with my super strength. lol
cliff- Posts : 62
Legend Status : 3
Join date : 2010-10-28
Age : 51
Location : Caboolture
Similar topics
» Axial bearings
» Honcho alloy lower links.....SOLD
» First try Lnc to scaler
» Cheap parts link
» Custom Link sets.
» Honcho alloy lower links.....SOLD
» First try Lnc to scaler
» Cheap parts link
» Custom Link sets.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|