Portal Hubs
4 posters
Page 1 of 1
Re: Portal Hubs
i come aross these looking for upgrades for the honcho. they are for an axial, not sure if they will work on the losi though mate? hope it helps out in someway.
cheers ads
cheers ads
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: Portal Hubs
I origionaly started with an Axial, which still have.. .i think it is just as capable if not more capable than the losi.
To tell you the truth I am over the Losi... I am sick of the constant maintainence and breakages
But these are for my scaler
To tell you the truth I am over the Losi... I am sick of the constant maintainence and breakages
But these are for my scaler
Re: Portal Hubs
Here ya go Brett, these are the ones i found on ebay.
http://shop.ebay.com.au/i.html?_nkw=3+racing+high+axial&_sacat=0&LH_AvailTo=15&_dmpt=AU_Toys_Hobbies_Radio_Controlled_Vehicles&_odkw=3+racing+axial&_osacat=0&_trksid=p3286.c0.m270.l1313
On a side note, how do these things go, alright or not worth the $$$??
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: Portal Hubs
I knew they were called something strange
I have been running them on my scaler and havn't had any dramas....althought I have pulled them apart and loctited all of the bolts, there were reports of them working loose in the early days.
They do assist with down hill braking due to the reduction in the portal... but this comes with a sacrafice of top end wheel speed
Higher diff clearance... but that also raises you center of gravity
Slightly wide foot print.. at present I still intend on running them unless I start having dramas
I have been running them on my scaler and havn't had any dramas....althought I have pulled them apart and loctited all of the bolts, there were reports of them working loose in the early days.
They do assist with down hill braking due to the reduction in the portal... but this comes with a sacrafice of top end wheel speed
Higher diff clearance... but that also raises you center of gravity
Slightly wide foot print.. at present I still intend on running them unless I start having dramas
Re: Portal Hubs
Cool, thanks for that mate.
I was thinking of getting a set for the my new scaler.
I was thinking of getting a set for the my new scaler.
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: Portal Hubs
I just found these little suckers.... they are a bit more expensive but look a loy sturdier
http://cgi.ebay.com/Integy-High-Clearance-Knuckle-w-Reduction-Ratio-AX10-/330487446146?pt=Radio_Control_Parts_Accessories&hash=item4cf2963a82
http://cgi.ebay.com/Integy-High-Clearance-Knuckle-w-Reduction-Ratio-AX10-/330487446146?pt=Radio_Control_Parts_Accessories&hash=item4cf2963a82
Re: Portal Hubs
holy ####, can you say staunch.
I reckon they would take some serious abuse.
Only one problem though. That price is only for a pair...so they work out even more expensive than the 3 racing ones.
I reckon they would take some serious abuse.
Only one problem though. That price is only for a pair...so they work out even more expensive than the 3 racing ones.
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: Portal Hubs
stika wrote:I just found these little suckers.... they are a bit more expensive but look a loy sturdier
http://cgi.ebay.com/Integy-High-Clearance-Knuckle-w-Reduction-Ratio-AX10-/330487446146?pt=Radio_Control_Parts_Accessories&hash=item4cf2963a82
Remember you get what you pay for. I can'y say I've ever read anything good about Integy products from users.
RiZZa- Posts : 202
Legend Status : 9
Join date : 2010-10-26
Age : 45
Location : Logan
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|