The Ghetto Blaster
5 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: The Ghetto Blaster
sweet ride bro,
i'll see it at Q rock, hopefully with some new bits.
cheers Aaron.
i'll see it at Q rock, hopefully with some new bits.
cheers Aaron.
azwa- Posts : 911
Join date : 2010-11-01
Re: The Ghetto Blaster
RiZZa wrote:Hhmm I got this one as it was recommended by hobby king when i was shopping: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7187
Yeha that for the basic one. You've got more adjustment than whats on that faceplate. Just print off the bottom faceplate & you'll have all the adjustments.
WIDELOAD- Posts : 655
Join date : 2010-10-26
Re: The Ghetto Blaster
The saga continues:
Axial servo plate drilled, countersunk, notched and mounted. I notched the back to clear the front of the 3 link. Test fitting of a servo reveals that I'll have to notch the front crossmember to clear the servo horn during articulation or raise the suspension back up a bit. Its good to get the fire in the belly to get the truck finished. I won't bother 4 linking the suspension as I just can't be assed. Once the motor and esc are in and sorted, it will get a very 'left field' body and probably a change of wheels and rubber and I'll happily call it done.
Axial servo plate drilled, countersunk, notched and mounted. I notched the back to clear the front of the 3 link. Test fitting of a servo reveals that I'll have to notch the front crossmember to clear the servo horn during articulation or raise the suspension back up a bit. Its good to get the fire in the belly to get the truck finished. I won't bother 4 linking the suspension as I just can't be assed. Once the motor and esc are in and sorted, it will get a very 'left field' body and probably a change of wheels and rubber and I'll happily call it done.
RiZZa- Posts : 202
Join date : 2010-10-26
Re: The Ghetto Blaster
nawsome stuff riz
What motor you end up going with?
What motor you end up going with?
WIDELOAD- Posts : 655
Join date : 2010-10-26
Re: The Ghetto Blaster
1500. Although yesterday I saw a 370 size 3200kv motor that would fit the stock motor mount......
RiZZa- Posts : 202
Legend Status : 9
Join date : 2010-10-26
Age : 45
Location : Logan
Re: The Ghetto Blaster
RiZZa wrote:1500. Although yesterday I saw a 370 size 3200kv motor that would fit the stock motor mount......
That should work nice....not too slow, not too fast
I think the 3200 wouldnt really work, it'd cog like a bitch. Would go like stink in a straight line tho.
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: The Ghetto Blaster
This new motor is sweet hey. A lot quieter than the last one. ESC seems to work better when you are patient after resetting it too I've noticed. Just have to make up a new plate/mount next week and I'll be ready to go again.
RiZZa- Posts : 202
Legend Status : 9
Join date : 2010-10-26
Age : 45
Location : Logan
Page 2 of 2 • 1, 2
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|