Winch Truck Build

Page 1 of 3 1, 2, 3  Next

Go down

Winch Truck Build Empty Winch Truck Build

Post  Ads on Fri Dec 03, 2010 6:42 am

well here is a run down of where my truck is currently at, whats on it, whats going on it and whats left to be built. it may take a couple of beers to read, i no i coulda down with a couple typing and thinking of whats on the truck.

started off with a honcho kit slightly modified on build up with the following:

Axial heavy duty diff gears front and rear
Axial Aluminum Knuckle
Axial Aluminum C Hub Carrier on the front with
Axial AX10 Competition Universal Joint Drive Shaft Set
ST Racing Concepts ax10 aluminium axle lockout & axle set on the rear
Dinky RC Axial AX10/SCX10 1-piece Truss Link (true 4link)
Axial Steel Outdrives
Junfac Carbon Steel Drivshafts
Hand Brothers CMS Kit
was running a 7955tg hitec servo and alloy horn but with the wet weather ive gone back to my multiple cheapo toward pro946r and plastic servo.
Hot Racing aluminum shock hoops
18.5t Novak Goat 3s brushless Motor/ESC combo
2200mah 3s lipo
currently standard losi tx and rx.
2 sets of standard axial rims, one running weighted tsl super swampers
the other running wieghted flat irons.
Accesories(thanks cliff) - tow/snatch strap, trunk protector, snatch block and ground anchor.
i finally painted the spare shell metallic green last night unsure of how its turned out, but i got excuses if its $#ithouse.

thats the current set up and got it up and running.

bits i have to go on.
Twin motor modified 3racing winch, with king kong hook & running seperate power source, should be installed and functional for the qurry sundy.

Parts im waiting on that are either, waiting for stock, are in transit or otherwise(wish list):

Proline 95mm shocks(stock)
Hot Racing Tranny Hard Anodizing Alum. Center Gear set(stock)
RC4WD 4ch transmitter receiver(transit)
More 3s lipos(transit)
Rear Modified 3 racing winch(need to build my custom tray and buy the winchs)
Custom SkR8Pn links uppers and lowers rear and same again with panhard rod up front.(hopefully in transit cant wait for them to rock up)
MSD QuickSand High Mount Winch(tryin to source one is a B1TC#)

Bits for me to build:
Front winch bar (maybe joined by brushbars into)
Sliders
Rear Tube tray with rear winch mount.

Thats all i can think of at the moment, apart from tidying up and waterproofing my electrics when its closer to finished.

cheers ads

THese are the only shots ive got so far.
Winch Truck Build IMG_2806
Winch Truck Build IMG_2804
Winch Truck Build IMG_2803
Winch Truck Build IMG_2802
Winch Truck Build IMG_2801
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Sat Dec 04, 2010 11:44 am

Winch Truck Build IMG_2825
Winch Truck Build IMG_2824-Copy2
Winch Truck Build IMG_2826-Copy
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  WIDELOAD on Sat Dec 04, 2010 1:48 pm

that looks awesome ads...im liking the colour!
WIDELOAD
WIDELOAD

Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 33
Location : Ipswich

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Rustykaos on Sat Dec 04, 2010 3:07 pm

Looking good adz. Will see you at Qrock.
Rustykaos
Rustykaos

Posts : 383
Legend Status : 21
Join date : 2010-10-26
Age : 38
Location : Camp Hill, Brisbane

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Sat Dec 04, 2010 10:28 pm

shes lookin good adz,nice colour choice.


cheers Aaron.
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  RiZZa on Sat Dec 04, 2010 11:05 pm

Nice truck Very Happy
RiZZa
RiZZa

Posts : 202
Legend Status : 9
Join date : 2010-10-26
Age : 40
Location : Logan

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Sun Dec 05, 2010 9:46 am

cheers boys,
yeah the paint came out alot better than i anticipated. still a few things to sort out but its getting there.

thanks again

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  gravedigger on Sun Dec 05, 2010 11:44 am

looks good cyclops
gravedigger
gravedigger

Posts : 325
Legend Status : 11
Join date : 2010-10-26
Age : 45

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Mon Dec 06, 2010 3:33 pm

upgraded the winch cable to white line marking string to look like the white plasma that was very common at the last round of winch comp out at cruiser, wired up the winch through a speedy (will be 3s powered soon enough) and my new RC4WD 4ch transmitter turned up today and is workin sweet. also found out that one of the grub screws come lose on the spool on the winch out at the quarry sundy, so it was powering 2 motors but only one was attatched to the spool Rolling Eyes still pulled sweet tho, so i sorted that out and all tight now.

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Wed Dec 08, 2010 2:08 pm

fitted the custom upper front link and upper rear links thanks to skr8pn, look the goods, got them cut down to the right length and tapped out. got the flat irons back on while the swamper foams dry out (popped a couple of bads this arvo) now running braid winch line as well.

there are more balloons than a kids birthday party being used as temporary water resisting with the wet weather, will go more permanent when i have sorted out whats going where with the electrics.

also have set up the hold brake properly(finally)

hopefully get some good snaps with aperture tomoro arvo at whites hill.

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Sun Dec 19, 2010 11:50 am

novak goat system is outa the honcho and in the losi cause i killed the losi esc. running simos spare esc and the standard night crawler can in the hocho to keep it running while i wait for my upgraded replacement setup to rock up. should be good.

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Mon May 16, 2011 6:49 am

the ol honch is need of a new cab but not without some nice barwork (not plastic) to go with it ,
so i have been asked to complete the task.
picked her up yesterday & got to spend a couple of hours in the shed & managed to start on the rear

Winch Truck Build Barworkforadshoncho001

Winch Truck Build Barworkforadshoncho002

Winch Truck Build Barworkforadshoncho003

Winch Truck Build Barworkforadshoncho004

Winch Truck Build Barworkforadshoncho005

what do ya think so far?????
ads what sort of design do you want on the supports same as mentioned yesterday ???
let me know bud i wont get back in the shed untill friday so take ya time bro....

azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Mon May 16, 2011 7:22 am

looks the goods so far mate.
with the rest of the bracing. yea same as mentioned yesterdy, maybe from the outsides of where "the high level stop light" is out to which ever rear corner you rekon will be better for actual stength ill have a bit of a play round in paint to get some visuals and let u no forsure before fridy

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Tue May 17, 2011 1:46 pm

im thinkin the rearward bracing, from the outside of the "hi level stop light" to the corners at the back end of the tray not the outer corners, if that makes sense.
cheer ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Tue May 17, 2011 1:58 pm

yeah bud thats how i was goimg to do it ,
except from the centre not either side of the light,
i'll have a look at it & definately not the outside corners
it just doesnt look right .
i was also thinking my old 80'series but its to much weight at the back
especially with ya batts back there aswell
like this drunken
Winch Truck Build Scalerun027
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Wed May 18, 2011 3:23 am

yea cool. sounds like a goer mate.

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  scottb on Wed May 18, 2011 5:53 am

Who painted the second honcho Ads????.......very nice indeed mate.

Aaron you need to get some paint colour focus....ha aha aha........".I remember that green"....oooohhhhohho cheers
It was worse than the hilux green......
scottb
scottb

Posts : 537
Legend Status : 18
Join date : 2010-10-26
Age : 55
Location : Waterford

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Wed May 18, 2011 1:15 pm

yea it come up a treat, thats why i have waited to put it on with some decent protection.
commandokeeno from TCP painted it for me, he also did the new lid for the losi & simos 4 door jeep.

cheers ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Sat May 21, 2011 2:49 am

allright ads i didnt go from top centre as due to the width of this thing it looked a bit No
also got a start on the sliders ,
still have more to do to the rear but if its going in the wrong direction let me know before i venture to far:lol:

Winch Truck Build Barworkforadshoncho002-1

Winch Truck Build Barworkforadshoncho003-1

Winch Truck Build Barworkforadshoncho004-1
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Sat May 21, 2011 12:13 pm

worked out the mounts for the sliders ,
ads i need to know if all ya batts are the same as this one ???

Winch Truck Build Barworkforadshoncho005-1

Winch Truck Build Barworkforadshoncho006

Winch Truck Build Barworkforadshoncho007

Winch Truck Build Barworkforadshoncho008

Winch Truck Build Barworkforadshoncho009

azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  scottb on Sun May 22, 2011 2:21 am

Very nice Ads.......what are ya doin with the old ones mate.....hint hint.
scottb
scottb

Posts : 537
Legend Status : 18
Join date : 2010-10-26
Age : 55
Location : Waterford

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Sun May 22, 2011 3:11 am

the sliders have a lick of u/coat on em , heres a pic ,
i also added batt holders on em so ads can get em off the tray ...

Winch Truck Build Barworkforadshoncho001-2

Winch Truck Build Barworkforadshoncho002-2


azwa .
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  micks troll on Sun May 22, 2011 1:25 pm

azwa wrote:the sliders have a lick of u/coat on em , heres a pic ,
i also added batt holders on em so ads can get em off the tray ....

azwa .

mate she looks the goods!! Hope i'll keep up when i get mine together!!!
micks troll
micks troll

Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 37
Location : South of the Ghetto

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Ads on Sun May 22, 2011 1:42 pm

yea cheers heaps az, the slider looked mint at the quarry, its all coming along nicely mate. the tray is looking good too mate so its cool for ya to keep doing what your doing, seems to be workin out real well.
with the battery set up you've sorted i should hopefully be able to run an electrics box like scottys? so i can go swimming too cheers question scott. you chassis is an scx10 isnt it? does the sealed box u got form jaycar sit inside the rails in the back?

cheers again ads
Ads
Ads

Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 30
Location : Brisbane, Qld, Australia

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  azwa on Mon May 23, 2011 8:43 am

allright got the tray half mounted rear half also
adding a winch cradle at the rear
after all it is a winch truck Laughing

heres a couple of pics sliders tray & body sittin in mock up ...
comments so far please i need the motivation ...

Winch Truck Build Barworkforadshoncho001-3

Winch Truck Build Barworkforadshoncho002-3

Winch Truck Build Barworkforadshoncho003-2

Winch Truck Build Barworkforadshoncho004-2

Winch Truck Build Barworkforadshoncho005-2




azwa .
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 45
Location : earth

Back to top Go down

Winch Truck Build Empty Re: Winch Truck Build

Post  Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum