The Scale Garage
Would you like to react to this message? Create an account in a few clicks or log in to continue.

My Rig_SCX10 Honcho Chassis build

+3
RiZZa
Rustykaos
Aperture
7 posters

Page 2 of 2 Previous  1, 2

Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  WIDELOAD Tue Dec 28, 2010 12:01 pm

Aperture wrote:i like the chrome plus it sits on the front bar work keeping the front cab up. saves having to attach the front all the time.

i used to break gears all the time in the real truck as well, but this is way cheaper to replace. the gears I have been busting are only plastic ones though and the truck does weigh a little bit more than normal.


Looks awesome scott. Came out looking sweet.

fucks me how you're breaking gears tho...I am still on my original (over 2yrs now) gearbox gears in my 2.2 comp rig and ive never (touch wood) broken one. I've had that bitch bound up to the point where it either moves the massive rock its wedged on, or flips the whole rig around the tyre thats bound... affraid

WIDELOAD

Posts : 655
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  azwa Tue Dec 28, 2010 12:19 pm

lookin cool mate,
the only thing it needs is some arb rex 60 diffs to finish it off.

cheers Aaron.

azwa

Posts : 911
Join date : 2010-11-01

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Aperture Wed Dec 29, 2010 1:42 am

hey aaron

i am still thinking about your 60 diffs. someone told me though that they have a lot of play inside them. do your have this and how did you fix the problems ?

Aperture

Posts : 257
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  scottb Wed Dec 29, 2010 4:06 am

Very sweet Scotty......thats a proper job then mate, its even higher than my hilux. cheers

scottb

Posts : 537
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Aperture Wed Dec 29, 2010 7:55 am

just got back from a run with the boys at JC. it does not look like that anymore. although i will say that the extra height is a huge bonus. you just have to pick your lines better to stop it from swaying too much.

Aperture

Posts : 257
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  azwa Wed Dec 29, 2010 8:38 am

Aperture wrote:hey aaron

i am still thinking about your 60 diffs. someone told me though that they have a lot of play inside them. do your have this and how did you fix the problems ?

a shim (washer) between the pinion & bearing its an easy fix,as long as ya do it (if needed) before using em otherwise shred goes the pinion lol!
thats right i shreded a front & rear but i'm not running a slipper at the moment clown but have since rectified the prob & no dramas now.


cheers Aaron.

azwa

Posts : 911
Join date : 2010-11-01

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Aperture Wed Dec 29, 2010 8:42 am

never made shim before. what did you use ?

Aperture

Posts : 257
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  azwa Wed Dec 29, 2010 8:52 am

Aperture wrote:never made shim before. what did you use ?

a washer Rolling Eyes

azwa

Posts : 911
Join date : 2010-11-01

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Aperture Wed Dec 29, 2010 8:56 am

what size and how thick ?

Aperture

Posts : 257
Join date : 2010-10-26

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  azwa Fri Dec 31, 2010 1:31 am

dia no bigger than base of the pinion
& thick enough to take out any movement,
they run an E clip on the shaft so its preety simple really.
azwa
azwa

Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 49
Location : earth

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Aperture Mon Jan 10, 2011 12:53 am

Boys

the lights and alloy rims have finally arrived. its rainin outside...... that means i can work on the truck.

pics to come when done. yippee !!!! cheers
Aperture
Aperture

Posts : 257
Legend Status : 7
Join date : 2010-10-26
Age : 52
Location : Coorparoo

Back to top Go down

My Rig_SCX10 Honcho Chassis build - Page 2 Empty Re: My Rig_SCX10 Honcho Chassis build

Post  Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum