First try Lnc to scaler
+5
WIDELOAD
scottb
Ads
azwa
micks troll
9 posters
Page 3 of 7
Page 3 of 7 • 1, 2, 3, 4, 5, 6, 7
Re: First try Lnc to scaler
hey mick rip ya motor out & pull ya pinion off
c ya soon with the rooster & 35 t combo
c ya soon with the rooster & 35 t combo
azwa- Posts : 911
Join date : 2010-11-01
Re: First try Lnc to scaler
azwa wrote:hey mick rip ya motor out & pull ya pinion off
c ya soon with the rooster & 35 t combo
Haha i cant drive with the lil 4 banger in there let alone a v8
micks troll- Posts : 188
Join date : 2011-05-08
Re: First try Lnc to scaler
micks troll wrote:azwa wrote:hey mick rip ya motor out & pull ya pinion off
c ya soon with the rooster & 35 t combo
Haha i cant drive with the lil 4 banger in there let alone a v8
na its a 35t , more like ya 4 banger with the air filter taken out
azwa- Posts : 911
Join date : 2010-11-01
Re: First try Lnc to scaler
haha yeh had to strap a hair drier to the side to give it more juice LOL
Thanks heaps!!
So far the truck now has a 35turn motor 22pinion (donors)
Losi diffs and Night crawler arms
punisher shafts (donors)
Custom weighted and built chassis, similar to axial!
Hitec HS645MG steering servo
Rooster crawler speedy (donor)
1.9 black steelies with Swamper Iroks
Currenly running a donor body thanks to RC4WD stuffin me around! body and all donor bit thanks to jamie and az!!!
Thanks heaps!!
So far the truck now has a 35turn motor 22pinion (donors)
Losi diffs and Night crawler arms
punisher shafts (donors)
Custom weighted and built chassis, similar to axial!
Hitec HS645MG steering servo
Rooster crawler speedy (donor)
1.9 black steelies with Swamper Iroks
Currenly running a donor body thanks to RC4WD stuffin me around! body and all donor bit thanks to jamie and az!!!
micks troll- Posts : 188
Join date : 2011-05-08
1st comp!!!
Well 1st comp today for piglet (or is that boar) LOL It did alright just need some more wheel speed as she's all screamin and no going still was an awesome day and no breakages cant wait to have all my own gear and deck it out for the next comp!
Need motor and esc combo ideas help all!!
Cheers Mick
Need motor and esc combo ideas help all!!
Cheers Mick
micks troll- Posts : 188
Join date : 2011-05-08
New parts!!!
Well done some shopping New HR shocks , punisher shafts, 17 degree rod ends, new body, new motor and esc, can't wait!
As for RC4WD they are a bunch of and the damaged body is now being sent back to them getting refunded and going elsewhere for my parts (yes I know they make half this gear but they have been the worst company I have ever delt with) so no more direct dealings with the
Cheers Mick
As for RC4WD they are a bunch of and the damaged body is now being sent back to them getting refunded and going elsewhere for my parts (yes I know they make half this gear but they have been the worst company I have ever delt with) so no more direct dealings with the
Cheers Mick
micks troll- Posts : 188
Join date : 2011-05-08
Re: First try Lnc to scaler
Sucks to hear about the #### fight with RC4wd Mick. Sad part is its not uncommon when dealing with them directly.
Try going through Team GoNads or Tulare Hobbies next time...they stock all the RC4wd gear, pretty much the same price & i've never had an issue with them thus far.
Try going through Team GoNads or Tulare Hobbies next time...they stock all the RC4wd gear, pretty much the same price & i've never had an issue with them thus far.
WIDELOAD- Posts : 655
Join date : 2010-10-26
Re: First try Lnc to scaler
WIDELOAD wrote:Sucks to hear about the #### fight with RC4wd Mick. Sad part is its not uncommon when dealing with them directly.
Try going through Team GoNads or Tulare Hobbies next time...they stock all the RC4wd gear, pretty much the same price & i've never had an issue with them thus far.
Cheers mate I'll add them to my list of other place to shop!
This order i went through RPP Hobby for all the bits and pieces, and Hobby Hot for motor and esc combo. see how they go, cant wait to rebuild it again!!!!
Will pull the diffs apart and lube em up to hopefully quite them down a bit transfer is abit noisey too, just the gears on the back squell like a pig
micks troll- Posts : 188
Join date : 2011-05-08
Re: First try Lnc to scaler
now with the b/less hopefully she'll have the grunt to go with the squeall
azwa- Posts : 911
Join date : 2010-11-01
Ongoing
The trouble is I'll need 3s lipos for more speed. Wideloads been helpin me out heaps with ideas so will see what happens when I get the gear. I got rid of 60% of the noise, the gears between the motor and gearbox (exsposed ones) need pulling off and dousing the bearings with silicon spray. Now it's heaps quieter Just ya tailshafts are noisy as hell See how the new shafts go I may need to modify lower arm length to get correct angle on the unis I think! All good I suppose, gotta make mistakes to learnazwa wrote:now with the b/less hopefully she'll have the grunt to go with the squeall
Cheers Mick
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
micks troll wrote:The trouble is I'll need 3s lipos for more speed. Wideloads been helpin me out heaps with ideas so will see what happens when I get the gear. I got rid of 60% of the noise, the gears between the motor and gearbox (exsposed ones) need pulling off and dousing the bearings with silicon spray. Now it's heaps quieter Just ya tailshafts are noisy as hell See how the new shafts go I may need to modify lower arm length to get correct angle on the unis I think! All good I suppose, gotta make mistakes to learnazwa wrote:now with the b/less hopefully she'll have the grunt to go with the squeall
Cheers Mick
this thing will be more capable then the golfball ,
your building a preety wicked beast mick ,
i think your car might be the 1 to watch
azwa- Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 49
Location : earth
Re: First try Lnc to scaler
azwa wrote:this thing will be more capable then the golfball ,
your building a preety wicked beast mick ,
i think your car might be the 1 to watch
haha the Golfball only had 1 locker 1 lsd and 36s, I'm scale running 46s and twin locked Only the driving will tell Cant wait for the parts to rock up tho
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
body colour?
While waiting for the parts and body to arrive i have been checkin out some 1to 1 scale trucks and this is sorta the paint scheme I'm looking at: candy apple red (or close) for main and pearl white for centre and roof including top of doors etc
Tell me what ya think More like the bottom pic but continue the pearl white down to the bonnet/ above door handle hieght
Tell me what ya think More like the bottom pic but continue the pearl white down to the bonnet/ above door handle hieght
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
sounds like a wicked paint scheme bro
azwa- Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 49
Location : earth
Re: First try Lnc to scaler
azwa wrote:sounds like a wicked paint scheme bro
Just dunno how to paint
On a great note the motor and esc already arrived ordered last Thursday delivered to door today
to Hobby Hot
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
Looks like the 32 ezrun combo isnt for me (too slow) so will be changing motor, oh well ya gotta try
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Motor and pasts
Well waiting for parts to arrive from RPP and re-ordered a new motor esc combo. I have now ordered a Scorpion 2580kv motor and waterproof Sidewinder esc unit with field card, one small problem i found today is TZI has run out of 2580kv motors but has offered to send the 3000kv motor, hope it has enough low down torque now The bloke was more than helpful tho and is sending out an adapter plate free
What pinion will i need to run on this? Troy help
Oh and have changed the colours for the truck Now it'll be Tamiya's sky blue anodized aluminium and pearl white combo a bit like this. I also bought the smoke for the windows hurry up parts
What pinion will i need to run on this? Troy help
Oh and have changed the colours for the truck Now it'll be Tamiya's sky blue anodized aluminium and pearl white combo a bit like this. I also bought the smoke for the windows hurry up parts
Last edited by micks troll on Mon Jun 20, 2011 12:29 pm; edited 1 time in total
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
with the losi gearing you shouldn't have too much drama with torque. but i would start with a 12 or 14 tooth pinion personally and go from there, that way you can work up to the wheel speed & monitor temps. that way you shouldnt cook ya new motor. but id wait for the guru's advice aswell
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: First try Lnc to scaler
Ads wrote:with the losi gearing you shouldn't have too much drama with torque. but i would start with a 12 or 14 tooth pinion personally and go from there, that way you can work up to the wheel speed & monitor temps. that way you shouldnt cook ya new motor. but id wait for the guru's advice aswell
Cheers Ad's was thinking around those sizes as was looking around 15tooth for the 2580kv motor so will have to get some pinions to play with as only have a 20 tooth
cheer's Mick
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
yea i got a 14tooth sittin here, if catch up with az on firdy i can leave it with him for ya want mate. off to the springs satdy to freeze me balls off haha and watch a winch comp
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: First try Lnc to scaler
Ads wrote:yea i got a 14tooth sittin here, if catch up with az on firdy i can leave it with him for ya want mate. off to the springs satdy to freeze me balls off haha and watch a winch comp
That'd be great if ya could, 48p aye! yeh mate of mines racing i believe, if he aint stuck away with work. Phil Mcguiness in a purplish chopped 80series not sure who he's got naving as I'm helping his usually navi move on the weekend . Be awesome to watch but far********k the cold, being will help tho
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
yeah standard axial 48p 14tooth pinion.
will keep an eye out for the purple 80. the bloke i no racing, is the pink bits gq, oh yea already got the rum packed can hardly roll me swag up theres that many blankets and warm #### etc in there
will keep an eye out for the purple 80. the bloke i no racing, is the pink bits gq, oh yea already got the rum packed can hardly roll me swag up theres that many blankets and warm #### etc in there
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: First try Lnc to scaler
Hey Mick, a 3000kv motor turns more rpm than a 27t brushed motor
i'd go a 14t pinion or smaller, gear according to motor temps. Keep it under 80*c and it'll be sweet.
You torque will be fine as well, those scorpion motors are staunch and will break #### if you arent careful.
i'd go a 14t pinion or smaller, gear according to motor temps. Keep it under 80*c and it'll be sweet.
You torque will be fine as well, those scorpion motors are staunch and will break #### if you arent careful.
WIDELOAD- Posts : 655
Legend Status : 40
Join date : 2010-10-26
Age : 37
Location : Ipswich
Re: First try Lnc to scaler
Ads wrote:yeah standard axial 48p 14tooth pinion.
will keep an eye out for the purple 80. the bloke i no racing, is the pink bits gq, oh yea already got the rum packed can hardly roll me swag up theres that many blankets and warm #### etc in there
hahhaaaa on swag Thats not Bruce and Alison, white patrol pink bar work?
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
WIDELOAD wrote:Hey Mick, a 3000kv motor turns more rpm than a 27t brushed motor
i'd go a 14t pinion or smaller, gear according to motor temps. Keep it under 80*c and it'll be sweet.
You torque will be fine as well, those scorpion motors are staunch and will break #### if you arent careful.
Awesome Troy what i wanted to here
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
should be sweet mate, it will be cool to see the losi kick off with some wheel speed, maybe?
yea, hopefully its worth it with the swag mate, i only no him as deano haha. im pretty sure his truck isnt even pink anymore.
yea, hopefully its worth it with the swag mate, i only no him as deano haha. im pretty sure his truck isnt even pink anymore.
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: First try Lnc to scaler
Ads wrote:should be sweet mate, it will be cool to see the losi kick off with some wheel speed, maybe?
yea, hopefully its worth it with the swag mate, i only no him as deano haha. im pretty sure his truck isnt even pink anymore.
haha now to break sh*t
yeh righteo it aint Bruce then.......... thats a huge bonus LOL have a great trip tho, loved drivin at the springs some wicked track!
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
Big thumbs up to Tziworld
Got motor and esc today (would of had it yesterday if aus post didn't stuff around at local post office ) Just need to get some m3 countersunk screws to mount the adapter plate and can get it all installed Found out our home computer doesnt support the right programme to download the Castle link but our laptop does! So I will get it out and up load, then i can change it anywhere
still havent got the sh*t from usa.....again
Got motor and esc today (would of had it yesterday if aus post didn't stuff around at local post office ) Just need to get some m3 countersunk screws to mount the adapter plate and can get it all installed Found out our home computer doesnt support the right programme to download the Castle link but our laptop does! So I will get it out and up load, then i can change it anywhere
still havent got the sh*t from usa.....again
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
+1 on Tzi
I,ve found them brilliant to deal with
I,m interested to see how the motor goes ( coz i,m thinking i already want one )
I,ve found them brilliant to deal with
I,m interested to see how the motor goes ( coz i,m thinking i already want one )
lunatick- Posts : 193
Legend Status : 6
Join date : 2011-04-06
Re: First try Lnc to scaler
lunatick wrote:+1 on Tzi
I,ve found them brilliant to deal with
I,m interested to see how the motor goes ( coz i,m thinking i already want one )
Mate as soon a I get my tailshafts, shocks etc from the States I'll be putting it together for a run and will let ya's know how it is. At the moment I have only played with it on the table so cant really give a judgement from that and haven't programmed it properly from the computer either
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
hey mick ive got the m3's & the flu
azwa- Posts : 911
Legend Status : 16
Join date : 2010-11-01
Age : 49
Location : earth
Re: First try Lnc to scaler
i got that 14tooth pinion here to give to az today.
Ads- Posts : 452
Legend Status : 24
Join date : 2010-10-26
Age : 35
Location : Brisbane, Qld, Australia
Re: First try Lnc to scaler
well ya got more than me i just got the fluazwa wrote:hey mick ive got the m3's & the flu
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Re: First try Lnc to scaler
Ads wrote:i got that 14tooth pinion here to give to az today.
Champion mate!! I'll go pester Az this weekend!
micks troll- Posts : 188
Legend Status : 0
Join date : 2011-05-08
Age : 41
Location : South of the Ghetto
Page 3 of 7 • 1, 2, 3, 4, 5, 6, 7
Similar topics
» Newbie Crawler becoming a Scaler 2.2
» Beno's Sierra Scaler!
» WIDELOAD's new project...Its a scaler, but not as you know it.
» Big fellas new scaler, its not what your thinking...
» Brushless motor for scaler
» Beno's Sierra Scaler!
» WIDELOAD's new project...Its a scaler, but not as you know it.
» Big fellas new scaler, its not what your thinking...
» Brushless motor for scaler
Page 3 of 7
Permissions in this forum:
You cannot reply to topics in this forum
|
|